SF series of flotation machine is not only applied to separating the non-ferrous metal, ferrous metals, precious metals, and chemical raw materials, recycling useful minerals, but also applied to selecting the non-metallic minerals such as the coal, fluorite, talc and so on.
SF of series flotation machine is the improved product of A-type. It can self-absorb mineral pulp and self-absorb air, its operating room is allocated horizontally. Compared to A-type, it has larger air-absorption capacity, lower power consumption, longer service life of impeller and cover, without need any supplementary equipment, better dressing efficiency.
This flotation machine can inhale adequate air that to be mixed with the slurry. On the other hand, the mixing pulp is intermixed with the drugs. At the same time, refine the bubble, and make the minerals conglutinate on the bubble, and then float on the surface of the ore pulp, to form the mineralized bubble.
XJK series of flotation machine can effectively make the low-grade ores become high- grade concentrates, especially for disseminated, complex ores, dealing with them can get better separation efficiency.
This series of flotation machine have the characteristic of less reagents consumption, large air rate, large capacity，easy maintenance, wear-resistant rubber of impeller and cover. It can be designed according to the users.
Beijing General Research Institute of Mining and Metallurgy designed JJF floatation machine referring to the principles of America Wemco-type floatation machine, it is a closely ideal air auto-absorption mechanical mixing floatation machine.
It has the characteristic of relatively steady air absorption, satisfied suspension of solid particles, low installed depth of impeller, low power consumption, long service life of stator, liquid surface balance, high dressing efficiency and so on.
The Magnetic Separator is suitable for wet magnetic separation of materials such as magnetite, calcined ore, etc. and it can remove the iron in the coal, non-metal and construction industries. The magnetic system is made from high quality ferrite magnetic materials and /or rare earth magnet steel. On the shell surface, the magnet intensity is 100-600mt. The wet type permanent magnet cylindrical separator is commonly used for iron ore separation. It is suitable for separating materials with high magnetism. In recent years, it has been used as concentrating equipment in place of magneticdewatering cell.
It has the following advantages: short magnetic circuit, little magnetic flux leakage, high magnetic intensity, low energy consumption, fine beneficiating results, simple structure and easy to maintain.